Events that come from tools on tablet devices. More...

Data Structures
struct	libinput_event_tablet_tool
	Tablet tool event representing an axis update, button press, or tool update. More...

Functions
struct libinput_event *	libinput_event_tablet_tool_get_base_event (struct libinput_event_tablet_tool *event)

int	libinput_event_tablet_tool_x_has_changed (struct libinput_event_tablet_tool *event)
	Check if the x axis was updated in this event. More...

int	libinput_event_tablet_tool_y_has_changed (struct libinput_event_tablet_tool *event)
	Check if the y axis was updated in this event. More...

int	libinput_event_tablet_tool_pressure_has_changed (struct libinput_event_tablet_tool *event)
	Check if the pressure axis was updated in this event. More...

int	libinput_event_tablet_tool_distance_has_changed (struct libinput_event_tablet_tool *event)
	Check if the distance axis was updated in this event. More...

int	libinput_event_tablet_tool_tilt_x_has_changed (struct libinput_event_tablet_tool *event)
	Check if the tilt x axis was updated in this event. More...

int	libinput_event_tablet_tool_tilt_y_has_changed (struct libinput_event_tablet_tool *event)
	Check if the tilt y axis was updated in this event. More...

int	libinput_event_tablet_tool_rotation_has_changed (struct libinput_event_tablet_tool *event)
	Check if the z-rotation axis was updated in this event. More...

int	libinput_event_tablet_tool_slider_has_changed (struct libinput_event_tablet_tool *event)
	Check if the slider axis was updated in this event. More...

int	libinput_event_tablet_tool_wheel_has_changed (struct libinput_event_tablet_tool *event)
	Check if the wheel axis was updated in this event. More...

double	libinput_event_tablet_tool_get_x (struct libinput_event_tablet_tool *event)
	Returns the X coordinate of the tablet tool, in mm from the top left corner of the tablet in its current logical orientation. More...

double	libinput_event_tablet_tool_get_y (struct libinput_event_tablet_tool *event)
	Returns the Y coordinate of the tablet tool, in mm from the top left corner of the tablet in its current logical orientation. More...

double	libinput_event_tablet_tool_get_dx (struct libinput_event_tablet_tool *event)
	Return the delta between the last event and the current event. More...

double	libinput_event_tablet_tool_get_dy (struct libinput_event_tablet_tool *event)
	Return the delta between the last event and the current event. More...

double	libinput_event_tablet_tool_get_pressure (struct libinput_event_tablet_tool *event)
	Returns the current pressure being applied on the tool in use, normalized to the range [0, 1]. More...

double	libinput_event_tablet_tool_get_distance (struct libinput_event_tablet_tool *event)
	Returns the current distance from the tablet's sensor, normalized to the range [0, 1]. More...

double	libinput_event_tablet_tool_get_tilt_x (struct libinput_event_tablet_tool *event)
	Returns the current tilt along the X axis of the tablet's current logical orientation, in degrees off the tablet's z axis. More...

double	libinput_event_tablet_tool_get_tilt_y (struct libinput_event_tablet_tool *event)
	Returns the current tilt along the Y axis of the tablet's current logical orientation, in degrees off the tablet's z axis. More...

double	libinput_event_tablet_tool_get_rotation (struct libinput_event_tablet_tool *event)
	Returns the current z rotation of the tool in degrees, clockwise from the tool's logical neutral position. More...

double	libinput_event_tablet_tool_get_slider_position (struct libinput_event_tablet_tool *event)
	Returns the current position of the slider on the tool, normalized to the range [-1, 1]. More...

double	libinput_event_tablet_tool_get_wheel_delta (struct libinput_event_tablet_tool *event)
	Return the delta for the wheel in degrees. More...

int	libinput_event_tablet_tool_get_wheel_delta_discrete (struct libinput_event_tablet_tool *event)
	Return the delta for the wheel in discrete steps (e.g. More...

double	libinput_event_tablet_tool_get_x_transformed (struct libinput_event_tablet_tool *event, uint32_t width)
	Return the current absolute x coordinate of the tablet tool event, transformed to screen coordinates. More...

double	libinput_event_tablet_tool_get_y_transformed (struct libinput_event_tablet_tool *event, uint32_t height)
	Return the current absolute y coordinate of the tablet tool event, transformed to screen coordinates. More...

struct libinput_tablet_tool *	libinput_event_tablet_tool_get_tool (struct libinput_event_tablet_tool *event)
	Returns the tool that was in use during this event. More...

enum libinput_tablet_tool_proximity_state	libinput_event_tablet_tool_get_proximity_state (struct libinput_event_tablet_tool *event)
	Returns the new proximity state of a tool from a proximity event. More...

enum libinput_tablet_tool_tip_state	libinput_event_tablet_tool_get_tip_state (struct libinput_event_tablet_tool *event)
	Returns the new tip state of a tool from a tip event. More...

uint32_t	libinput_event_tablet_tool_get_button (struct libinput_event_tablet_tool *event)
	Return the button that triggered this event. More...

enum libinput_button_state	libinput_event_tablet_tool_get_button_state (struct libinput_event_tablet_tool *event)
	Return the button state of the event. More...

uint32_t	libinput_event_tablet_tool_get_seat_button_count (struct libinput_event_tablet_tool *event)
	For the button of a LIBINPUT_EVENT_TABLET_TOOL_BUTTON event, return the total number of buttons pressed on all devices on the associated seat after the the event was triggered. More...

uint32_t	libinput_event_tablet_tool_get_time (struct libinput_event_tablet_tool *event)

uint64_t	libinput_event_tablet_tool_get_time_usec (struct libinput_event_tablet_tool *event)

enum libinput_tablet_tool_type	libinput_tablet_tool_get_type (struct libinput_tablet_tool *tool)
	Return the tool type for a tool object, see Vendor-specific tablet tool types for details. More...

uint64_t	libinput_tablet_tool_get_tool_id (struct libinput_tablet_tool *tool)
	Return the tool ID for a tool object. More...

struct libinput_tablet_tool *	libinput_tablet_tool_ref (struct libinput_tablet_tool *tool)
	Increment the reference count of the tool by one. More...

struct libinput_tablet_tool *	libinput_tablet_tool_unref (struct libinput_tablet_tool *tool)
	Decrement the reference count of the tool by one. More...

int	libinput_tablet_tool_has_pressure (struct libinput_tablet_tool *tool)
	Return whether the tablet tool supports pressure. More...

int	libinput_tablet_tool_has_distance (struct libinput_tablet_tool *tool)
	Return whether the tablet tool supports distance. More...

int	libinput_tablet_tool_has_tilt (struct libinput_tablet_tool *tool)
	Return whether the tablet tool supports tilt. More...

int	libinput_tablet_tool_has_rotation (struct libinput_tablet_tool *tool)
	Return whether the tablet tool supports z-rotation. More...

int	libinput_tablet_tool_has_slider (struct libinput_tablet_tool *tool)
	Return whether the tablet tool has a slider axis. More...

int	libinput_tablet_tool_has_wheel (struct libinput_tablet_tool *tool)
	Return whether the tablet tool has a relative wheel. More...

int	libinput_tablet_tool_has_button (struct libinput_tablet_tool *tool, uint32_t code)
	Check if a tablet tool has a button with the passed-in code (see linux/input.h). More...

int	libinput_tablet_tool_is_unique (struct libinput_tablet_tool *tool)
	Return nonzero if the physical tool can be uniquely identified by libinput, or nonzero otherwise. More...

uint64_t	libinput_tablet_tool_get_serial (struct libinput_tablet_tool *tool)
	Return the serial number of a tool. More...

void *	libinput_tablet_tool_get_user_data (struct libinput_tablet_tool *tool)
	Return the user data associated with a tool object. More...

void	libinput_tablet_tool_set_user_data (struct libinput_tablet_tool tool, void user_data)
	Set the user data associated with a tool object, if any. More...

uint32_t	libinput_event_tablet_pad_get_time (struct libinput_event_tablet_pad *event)

Detailed Description

Events that come from tools on tablet devices.

For events from the pad, see Tablet pad events.

Events from tablet devices are exposed by two interfaces, tools and pads. Tool events originate (usually) from a stylus-like device, pad events reflect any events originating from the physical tablet itself.

Note that many tablets support touch events. These are exposed through the LIBINPUT_DEVICE_CAP_POINTER interface (for external touchpad-like devices such as the Wacom Intuos series) or LIBINPUT_DEVICE_CAP_TOUCH interface (for built-in touchscreen-like devices such as the Wacom Cintiq series).

Function Documentation

§ libinput_event_tablet_pad_get_time()

uint32_t libinput_event_tablet_pad_get_time ( struct libinput_event_tablet_pad * event )

Parameters

event The libinput tablet pad event

Returns: The event time for this event

§ libinput_event_tablet_tool_distance_has_changed()

int libinput_event_tablet_tool_distance_has_changed ( struct libinput_event_tablet_tool * event )

Check if the distance axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0. For tablet tool events of type LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function always returns 1.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_get_base_event()

struct libinput_event* libinput_event_tablet_tool_get_base_event ( struct libinput_event_tablet_tool * event )

Returns: The generic libinput_event of this event

§ libinput_event_tablet_tool_get_button()

uint32_t libinput_event_tablet_tool_get_button ( struct libinput_event_tablet_tool * event )

Return the button that triggered this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_BUTTON, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: the button triggering this event

§ libinput_event_tablet_tool_get_button_state()

enum libinput_button_state libinput_event_tablet_tool_get_button_state ( struct libinput_event_tablet_tool * event )

Return the button state of the event.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: the button state triggering this event

§ libinput_event_tablet_tool_get_distance()

double libinput_event_tablet_tool_get_distance ( struct libinput_event_tablet_tool * event )

Returns the current distance from the tablet's sensor, normalized to the range [0, 1].

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_dx()

double libinput_event_tablet_tool_get_dx ( struct libinput_event_tablet_tool * event )

Return the delta between the last event and the current event.

If the tool employs pointer acceleration, the delta returned by this function is the accelerated delta.

This value is in screen coordinate space, the delta is to be interpreted like the return value of libinput_event_pointer_get_dx(). See Relative motion for tablet tools for more details.

Parameters

event The libinput tablet event

Returns: The relative x movement since the last event

§ libinput_event_tablet_tool_get_dy()

double libinput_event_tablet_tool_get_dy ( struct libinput_event_tablet_tool * event )

Return the delta between the last event and the current event.

If the tool employs pointer acceleration, the delta returned by this function is the accelerated delta.

This value is in screen coordinate space, the delta is to be interpreted like the return value of libinput_event_pointer_get_dx(). See Relative motion for tablet tools for more details.

Parameters

event The libinput tablet event

Returns: The relative y movement since the last event

§ libinput_event_tablet_tool_get_pressure()

double libinput_event_tablet_tool_get_pressure ( struct libinput_event_tablet_tool * event )

Returns the current pressure being applied on the tool in use, normalized to the range [0, 1].

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_proximity_state()

enum libinput_tablet_tool_proximity_state libinput_event_tablet_tool_get_proximity_state ( struct libinput_event_tablet_tool * event )

Returns the new proximity state of a tool from a proximity event.

Used to check whether or not a tool came in or out of proximity during an event of type LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY.

See Handling of proximity events for recommendations on proximity handling.

Parameters

event The libinput tablet tool event

Returns: The new proximity state of the tool from the event.

§ libinput_event_tablet_tool_get_rotation()

double libinput_event_tablet_tool_get_rotation ( struct libinput_event_tablet_tool * event )

Returns the current z rotation of the tool in degrees, clockwise from the tool's logical neutral position.

For tools of type LIBINPUT_TABLET_TOOL_TYPE_MOUSE and LIBINPUT_TABLET_TOOL_TYPE_LENS the logical neutral position is pointing to the current logical north of the tablet. For tools of type LIBINPUT_TABLET_TOOL_TYPE_BRUSH, the logical neutral position is with the buttons pointing up.

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_seat_button_count()

uint32_t libinput_event_tablet_tool_get_seat_button_count ( struct libinput_event_tablet_tool * event )

For the button of a LIBINPUT_EVENT_TABLET_TOOL_BUTTON event, return the total number of buttons pressed on all devices on the associated seat after the the event was triggered.

"

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_BUTTON. For other events, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: the seat wide pressed button count for the key of this event

§ libinput_event_tablet_tool_get_slider_position()

double libinput_event_tablet_tool_get_slider_position ( struct libinput_event_tablet_tool * event )

Returns the current position of the slider on the tool, normalized to the range [-1, 1].

The logical zero is the neutral position of the slider, or the logical center of the axis. This axis is available on e.g. the Wacom Airbrush.

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_tilt_x()

double libinput_event_tablet_tool_get_tilt_x ( struct libinput_event_tablet_tool * event )

Returns the current tilt along the X axis of the tablet's current logical orientation, in degrees off the tablet's z axis.

That is, if the tool is perfectly orthogonal to the tablet, the tilt angle is 0. When the top tilts towards the logical top/left of the tablet, the x/y tilt angles are negative, if the top tilts towards the logical bottom/right of the tablet, the x/y tilt angles are positive.

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis in degrees

§ libinput_event_tablet_tool_get_tilt_y()

double libinput_event_tablet_tool_get_tilt_y ( struct libinput_event_tablet_tool * event )

Returns the current tilt along the Y axis of the tablet's current logical orientation, in degrees off the tablet's z axis.

That is, if the tool is perfectly orthogonal to the tablet, the tilt angle is 0. When the top tilts towards the logical top/left of the tablet, the x/y tilt angles are negative, if the top tilts towards the logical bottom/right of the tablet, the x/y tilt angles are positive.

If this axis does not exist on the current tool, this function returns 0.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis in degrees

§ libinput_event_tablet_tool_get_time()

uint32_t libinput_event_tablet_tool_get_time ( struct libinput_event_tablet_tool * event )

Parameters

event The libinput tablet tool event

Returns: The event time for this event

§ libinput_event_tablet_tool_get_time_usec()

uint64_t libinput_event_tablet_tool_get_time_usec ( struct libinput_event_tablet_tool * event )

Parameters

event The libinput tablet tool event

Returns: The event time for this event in microseconds

§ libinput_event_tablet_tool_get_tip_state()

enum libinput_tablet_tool_tip_state libinput_event_tablet_tool_get_tip_state ( struct libinput_event_tablet_tool * event )

Returns the new tip state of a tool from a tip event.

Used to check whether or not a tool came in contact with the tablet surface or left contact with the tablet surface during an event of type LIBINPUT_EVENT_TABLET_TOOL_TIP.

Parameters

event The libinput tablet tool event

Returns: The new tip state of the tool from the event.

§ libinput_event_tablet_tool_get_tool()

struct libinput_tablet_tool* libinput_event_tablet_tool_get_tool ( struct libinput_event_tablet_tool * event )

Returns the tool that was in use during this event.

The returned tablet tool is not refcounted and may become invalid after the next call to libinput. Use libinput_tablet_tool_ref() and libinput_tablet_tool_unref() to continue using the handle outside of the immediate scope.

If the caller holds at least one reference, this struct is used whenever the tools enters proximity again.

Note: Physical tool tracking requires hardware support. If unavailable, libinput creates one tool per type per tablet. See Tracking unique tools for more details.

Parameters

event The libinput tablet tool event

Returns: The new tool triggering this event

§ libinput_event_tablet_tool_get_wheel_delta()

double libinput_event_tablet_tool_get_wheel_delta ( struct libinput_event_tablet_tool * event )

Return the delta for the wheel in degrees.

Parameters

event The libinput tablet tool event

Returns: The delta of the wheel, in degrees, compared to the last event

See also: libinput_event_tablet_tool_get_wheel_delta_discrete

§ libinput_event_tablet_tool_get_wheel_delta_discrete()

int libinput_event_tablet_tool_get_wheel_delta_discrete ( struct libinput_event_tablet_tool * event )

Return the delta for the wheel in discrete steps (e.g.

wheel clicks).

Parameters

event The libinput tablet tool event

Returns: The delta of the wheel, in discrete steps, compared to the last event

See also: libinput_event_tablet_tool_get_wheel_delta_discrete

§ libinput_event_tablet_tool_get_x()

double libinput_event_tablet_tool_get_x ( struct libinput_event_tablet_tool * event )

Returns the X coordinate of the tablet tool, in mm from the top left corner of the tablet in its current logical orientation.

Use libinput_event_tablet_tool_get_x_transformed() for transforming the axis value into a different coordinate space.

Note: On some devices, returned value may be negative or larger than the width of the device. See Out-of-bounds motion events for more details.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_x_transformed()

double libinput_event_tablet_tool_get_x_transformed	(	struct libinput_event_tablet_tool *	event,
		uint32_t	width
	)

Return the current absolute x coordinate of the tablet tool event, transformed to screen coordinates.

Note: This function may be called for a specific axis even if libinput_event_tablet_tool_*_has_changed() returns 0 for that axis. libinput always includes all device axes in the event.; On some devices, returned value may be negative or larger than the width of the device. See Out-of-bounds motion events for more details.

Parameters

event	The libinput tablet tool event
width	The current output screen width

Returns: the current absolute x coordinate transformed to a screen coordinate

§ libinput_event_tablet_tool_get_y()

double libinput_event_tablet_tool_get_y ( struct libinput_event_tablet_tool * event )

Returns the Y coordinate of the tablet tool, in mm from the top left corner of the tablet in its current logical orientation.

Use libinput_event_tablet_tool_get_y_transformed() for transforming the axis value into a different coordinate space.

Note: On some devices, returned value may be negative or larger than the width of the device. See Out-of-bounds motion events for more details.

Parameters

event The libinput tablet tool event

Returns: The current value of the the axis

§ libinput_event_tablet_tool_get_y_transformed()

double libinput_event_tablet_tool_get_y_transformed	(	struct libinput_event_tablet_tool *	event,
		uint32_t	height
	)

Return the current absolute y coordinate of the tablet tool event, transformed to screen coordinates.

Note: This function may be called for a specific axis even if libinput_event_tablet_tool_*_has_changed() returns 0 for that axis. libinput always includes all device axes in the event.; On some devices, returned value may be negative or larger than the width of the device. See Out-of-bounds motion events for more details.

Parameters

event	The libinput tablet tool event
height	The current output screen height

Returns: the current absolute y coordinate transformed to a screen coordinate

§ libinput_event_tablet_tool_pressure_has_changed()

int libinput_event_tablet_tool_pressure_has_changed ( struct libinput_event_tablet_tool * event )

Check if the pressure axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_rotation_has_changed()

int libinput_event_tablet_tool_rotation_has_changed ( struct libinput_event_tablet_tool * event )

Check if the z-rotation axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_slider_has_changed()

int libinput_event_tablet_tool_slider_has_changed ( struct libinput_event_tablet_tool * event )

Check if the slider axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_tilt_x_has_changed()

int libinput_event_tablet_tool_tilt_x_has_changed ( struct libinput_event_tablet_tool * event )

Check if the tilt x axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_tilt_y_has_changed()

int libinput_event_tablet_tool_tilt_y_has_changed ( struct libinput_event_tablet_tool * event )

Check if the tilt y axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_wheel_has_changed()

int libinput_event_tablet_tool_wheel_has_changed ( struct libinput_event_tablet_tool * event )

Check if the wheel axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_x_has_changed()

int libinput_event_tablet_tool_x_has_changed ( struct libinput_event_tablet_tool * event )

Check if the x axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_event_tablet_tool_y_has_changed()

int libinput_event_tablet_tool_y_has_changed ( struct libinput_event_tablet_tool * event )

Check if the y axis was updated in this event.

For events that are not of type LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, this function returns 0.

Note: It is an application bug to call this function for events other than LIBINPUT_EVENT_TABLET_TOOL_AXIS, LIBINPUT_EVENT_TABLET_TOOL_TIP, or LIBINPUT_EVENT_TABLET_TOOL_PROXIMITY, or LIBINPUT_EVENT_TABLET_TOOL_BUTTON.

Parameters

event The libinput tablet tool event

Returns: 1 if the axis was updated or 0 otherwise

§ libinput_tablet_tool_get_serial()

uint64_t libinput_tablet_tool_get_serial ( struct libinput_tablet_tool * tool )

Return the serial number of a tool.

If the tool does not report a serial number, this function returns zero. See Tracking unique tools for details.

Parameters

tool	The libinput tool

Returns: The tool serial number

See also: libinput_tablet_tool_is_unique

§ libinput_tablet_tool_get_tool_id()

uint64_t libinput_tablet_tool_get_tool_id ( struct libinput_tablet_tool * tool )

Return the tool ID for a tool object.

If nonzero, this number identifies the specific type of the tool with more precision than the type returned in libinput_tablet_tool_get_type(), see Vendor-specific tablet tool types. Not all tablets support a tool ID.

Tablets known to support tool IDs include the Wacom Intuos 3, 4, 5, Wacom Cintiq and Wacom Intuos Pro series.

Parameters

tool	The libinput tool

Returns: The tool ID for this tool object or 0 if none is provided

See also: libinput_tablet_tool_get_type

§ libinput_tablet_tool_get_type()

enum libinput_tablet_tool_type libinput_tablet_tool_get_type ( struct libinput_tablet_tool * tool )

Return the tool type for a tool object, see Vendor-specific tablet tool types for details.

Parameters

tool	The libinput tool

Returns: The tool type for this tool object

See also: libinput_tablet_tool_get_tool_id

§ libinput_tablet_tool_get_user_data()

void* libinput_tablet_tool_get_user_data ( struct libinput_tablet_tool * tool )

Return the user data associated with a tool object.

libinput does not manage, look at, or modify this data. The caller must ensure the data is valid.

Parameters

tool	The libinput tool

Returns: The user data associated with the tool object

§ libinput_tablet_tool_has_button()

int libinput_tablet_tool_has_button	(	struct libinput_tablet_tool *	tool,
		uint32_t	code
	)

Check if a tablet tool has a button with the passed-in code (see linux/input.h).

Parameters

tool	A tablet tool
code	button code to check for

Returns: 1 if the tool supports this button code, 0 if it does not

§ libinput_tablet_tool_has_distance()

int libinput_tablet_tool_has_distance ( struct libinput_tablet_tool * tool )

Return whether the tablet tool supports distance.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_has_pressure()

int libinput_tablet_tool_has_pressure ( struct libinput_tablet_tool * tool )

Return whether the tablet tool supports pressure.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_has_rotation()

int libinput_tablet_tool_has_rotation ( struct libinput_tablet_tool * tool )

Return whether the tablet tool supports z-rotation.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_has_slider()

int libinput_tablet_tool_has_slider ( struct libinput_tablet_tool * tool )

Return whether the tablet tool has a slider axis.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_has_tilt()

int libinput_tablet_tool_has_tilt ( struct libinput_tablet_tool * tool )

Return whether the tablet tool supports tilt.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_has_wheel()

int libinput_tablet_tool_has_wheel ( struct libinput_tablet_tool * tool )

Return whether the tablet tool has a relative wheel.

Parameters

tool	The tool to check the axis capabilities of

Returns: Nonzero if the axis is available, zero otherwise.

§ libinput_tablet_tool_is_unique()

int libinput_tablet_tool_is_unique ( struct libinput_tablet_tool * tool )

Return nonzero if the physical tool can be uniquely identified by libinput, or nonzero otherwise.

If a tool can be uniquely identified, keeping a reference to the tool allows tracking the tool across proximity out sequences and across compatible tablets. See Tracking unique tools for more details.

Parameters

tool	A tablet tool

Returns: 1 if the tool can be uniquely identified, 0 otherwise.

See also: libinput_tablet_tool_get_serial

§ libinput_tablet_tool_ref()

struct libinput_tablet_tool* libinput_tablet_tool_ref ( struct libinput_tablet_tool * tool )

Increment the reference count of the tool by one.

A tool is destroyed whenever the reference count reaches 0. See libinput_tablet_tool_unref().

Parameters

tool	The tool to increment the ref count of

Returns: The passed tool

See also: libinput_tablet_tool_unref

§ libinput_tablet_tool_set_user_data()

void libinput_tablet_tool_set_user_data	(	struct libinput_tablet_tool *	tool,
		void *	user_data
	)

Set the user data associated with a tool object, if any.

Parameters

tool	The libinput tool
user_data	The user data to associate with the tool object

§ libinput_tablet_tool_unref()

struct libinput_tablet_tool* libinput_tablet_tool_unref ( struct libinput_tablet_tool * tool )

Decrement the reference count of the tool by one.

When the reference count of the tool reaches 0, the memory allocated for the tool will be freed.

Parameters

tool	The tool to decrement the ref count of

Returns: NULL if the tool was destroyed otherwise the passed tool

See also: libinput_tablet_tool_ref

Data Structures

Functions

Detailed Description

Function Documentation

§ libinput_event_tablet_pad_get_time()

§ libinput_event_tablet_tool_distance_has_changed()

§ libinput_event_tablet_tool_get_base_event()

§ libinput_event_tablet_tool_get_button()

§ libinput_event_tablet_tool_get_button_state()

§ libinput_event_tablet_tool_get_distance()

§ libinput_event_tablet_tool_get_dx()

§ libinput_event_tablet_tool_get_dy()

§ libinput_event_tablet_tool_get_pressure()

§ libinput_event_tablet_tool_get_proximity_state()

§ libinput_event_tablet_tool_get_rotation()

§ libinput_event_tablet_tool_get_seat_button_count()

§ libinput_event_tablet_tool_get_slider_position()

§ libinput_event_tablet_tool_get_tilt_x()

§ libinput_event_tablet_tool_get_tilt_y()

§ libinput_event_tablet_tool_get_time()

§ libinput_event_tablet_tool_get_time_usec()

§ libinput_event_tablet_tool_get_tip_state()

§ libinput_event_tablet_tool_get_tool()

§ libinput_event_tablet_tool_get_wheel_delta()

§ libinput_event_tablet_tool_get_wheel_delta_discrete()

§ libinput_event_tablet_tool_get_x()

§ libinput_event_tablet_tool_get_x_transformed()

§ libinput_event_tablet_tool_get_y()

§ libinput_event_tablet_tool_get_y_transformed()

§ libinput_event_tablet_tool_pressure_has_changed()

§ libinput_event_tablet_tool_rotation_has_changed()

§ libinput_event_tablet_tool_slider_has_changed()

§ libinput_event_tablet_tool_tilt_x_has_changed()

§ libinput_event_tablet_tool_tilt_y_has_changed()

§ libinput_event_tablet_tool_wheel_has_changed()

§ libinput_event_tablet_tool_x_has_changed()

§ libinput_event_tablet_tool_y_has_changed()

§ libinput_tablet_tool_get_serial()

§ libinput_tablet_tool_get_tool_id()

§ libinput_tablet_tool_get_type()

§ libinput_tablet_tool_get_user_data()

§ libinput_tablet_tool_has_button()

§ libinput_tablet_tool_has_distance()

§ libinput_tablet_tool_has_pressure()

§ libinput_tablet_tool_has_rotation()

§ libinput_tablet_tool_has_slider()

§ libinput_tablet_tool_has_tilt()

§ libinput_tablet_tool_has_wheel()

§ libinput_tablet_tool_is_unique()

§ libinput_tablet_tool_ref()

§ libinput_tablet_tool_set_user_data()

§ libinput_tablet_tool_unref()